MPPT Solar Charge Controller for Off-Grid and Hybrid Solar Systems
An MPPT solar charge controller sits between the PV array and battery, converting array voltage to the battery’s charging voltage while tracking the array’s maximum power point. Mars Solar lists this controller on this page. Below: separate charge control, tracking, battery matching and quotation.
Request a quote for these products
- Exporting since
- 2008
- Based in
- Foshan, Guangdong
- Markets
- More than 130 countries and regions

Choosing an MPPT Controller for an Off-Grid or Hybrid System
A solar panel charge controller regulates the current and voltage arriving from the array so the battery is charged within its limits and is not overcharged. In a typical chain, the array feeds the solar controller, the controller charges the battery bank, and the battery supplies the inverter or the direct load. At commissioning, record the battery type, the charge voltage setpoints and temperature sensing where the unit supports it, so the installed settings match the battery and the system design.
MPPT means the controller continuously adjusts its operating point to harvest more of the power the array can deliver. It earns its place clearly in cool or partly cloudy conditions and when array voltage sits well above battery voltage. Charging profile and voltage setpoints must match the battery type; when the battery reaches its setpoint, charging follows the profile’s absorption or float stage and then reduces or stops as that profile requires. For lithium batteries, confirm compatibility on the controller datasheet or in the quotation for the specific battery model, because a lead-acid default profile is not suitable for LFP; compatibility depends on that battery model.
- Separate or built-in: check whether charge control is built into the inverter or hybrid unit. Some off-grid inverters include a solar charge controller and some do not, so check the inverter’s own specification; where charge control is not built in, a separate charge controller is needed.
- Sizing a solar power controller: list array short-circuit current and array configuration, system (battery) voltage, the controller’s rated charge current, and derating for temperature and mounting.
- Other requirements can be sent through the inquiry form.
- Range fit: solar charge controllers sit in Mars Solar’s product range alongside solar power systems, commercial and industrial energy storage, home energy storage, lithium batteries, solar inverters, solar panels, solar street light systems and solar water pumps.
- Supply and MOQ: whether a controller ships inside a system configuration or on its own, and the MOQ, are confirmed per product in the quotation. Quotes are on FOB, CIF or EXW terms.
- Service: average lead time is about one month in peak season and within 15 workdays in off season, with the exact window confirmed once the configuration is fixed. OEM/ODM is available, and Mars Solar replies to enquiries within one working day.
MPPT charge controller specifications by listing
| Parameter | Value |
|---|---|
| Type | MPPT |
| Application | Charger Controller, Solar System Controller |
| Work Time (h) | 8~24hours |
| Product name | Solar Charge Controller |
| Color | green,black,blue |
| Working Mode | mppt |
How Array Voltage, Cable Runs and Temperature Affect Controller Choice
Array configuration, including how solar panels are wired, sets the voltage and current the controller sees. Long cable runs lose more voltage, so cable size and route belong in the same review as the controller rating. Temperature matters as well: a controller mounted in a hot enclosure has less thermal headroom, so the derating guidance for the model and the mounting location should be checked together. These are general design checks, not a substitute for the model datasheet.
Read the controller choice with the inverter, battery and load profile. The guide explains how daily energy use and backup hours shape the battery and array. Mars Solar configures and supplies the equipment; the supply contract defines the tests and documents. Commissioning support and remote diagnosis are included in technical support for the 100 kW / 215 kWh configuration; critical spares can ship with the main order, and engineer installation guidance applies to the 100 kW / 215 kWh configuration and is quoted separately where it can legally be provided if the project needs it.
What Mars Solar Supplies With a Controller and How Testing Is Documented
Mars Solar started exporting in 2008. Its scope covers system configuration, equipment supply, pre-shipment testing and documentation. For a controller supplied with an off-grid or hybrid system, the supply contract defines the tests and documents; a typical documentation set includes a test record, an as-built configuration table and equipment datasheets. Warranty is set per component, not as a single figure for the whole system, and is confirmed with the order. More detail on scope is on the supply scope page.
Payment is by T/T; PayPal, Western Union and MoneyGram are also available, confirmed per order. Mars Solar quotes on FOB, CIF or EXW terms, and the nearest ports are Foshan, Guangzhou and Shenzhen. CE certificate coverage for a specific model is confirmed with the quotation, and the CE certificates page carries the available references. Enquiries are answered within one working day, and other controller requirements can be sent through the inquiry form.
How an order runs
- Send your requirements
- The product or kit you need, your load list or daily energy use, site location, battery voltage where relevant, and the quantity.
- Configuration and quotation
- Mars Solar proposes matching equipment from the listings on this site, or an OEM/ODM version, and quotes on FOB, CIF or EXW terms.
- Sample and order
- Sample processing is available; minimum order quantity is confirmed per product.
- Tests before shipment
- Test items are performed and recorded before shipment; the supply contract defines the tests and documents.
- Payment and shipping
- Payment by T/T, with PayPal, Western Union and MoneyGram confirmed per order; the nearest ports are Foshan, Guangzhou and Shenzhen.
Request a quotation
Send the listing name or your power, battery voltage and capacity needs and the quantity; we will propose a matching configuration.
Or write to sales@solarkitsupplier.com