Solar Inverter Solutions for Off-Grid, Hybrid and Grid-Tie Projects
Mars Solar configures and supplies solar inverters, hybrid inverters and lithium batteries for off-grid, hybrid and grid-tie projects, with system design, testing before shipment, documentation and export support included in the supply scope.
Request a quote for these products
- Exporting since
- 2008
- Based in
- Foshan, Guangdong
- Markets
- More than 130 countries and regions

Solar Inverter Range and Type Selection
Mars Solar is a solar and battery storage system supplier and integrator based in Foshan, Guangdong, China. A solar inverter turns DC from a PV array or a battery bank into usable AC for loads or the grid, so selection follows the system type, load profile, required backup hours, inverter power and phase, and battery voltage and capacity. Inverters for solar projects sit in Mars Solar’s product range, and hybrid inverters, lithium batteries and PV modules are also supplied individually for integrators who already have a design.
Solar inverters are quoted within a configuration, such as the hybrid solar kits and off-grid solar kits Mars Solar supplies, and the listings on this page set out the available models with their specification tables. Send the system type, load list, site location and quantity through the inquiry form; Mars Solar replies to enquiries within one working day.
- A solar panel inverter is matched to the array’s voltage and current, the DC input window, inverter power and phase, and the planned load or storage setup; PV modules and inverters can be quoted together in a configuration.
- A solar power inverter converts DC from PV or batteries into AC for loads or the grid; sizing weighs continuous and surge load, daily energy use, backup hours, phase and the source.
- An off-grid solar inverter draws from a battery bank and supplies islanded AC loads; selection depends on battery voltage and capacity, load profile and surge, backup hours, phase, and coordination with MPPT charge controllers and lithium batteries.
- An off-grid inverter is built around battery supply and islanded loads, while a grid-tie inverter works with a utility-connected PV system and does not provide battery backup in the same way.
- A grid tie inverter suits a utility-connected PV system without battery backup; selection considers array voltage and current, inverter power and phase, and local interconnection requirements, and utility interconnection is excluded by default.
Hybrid inverters combine PV conversion, battery charging and discharging, and load supply in one unit for self-consumption or backup. Sizing inputs are the load profile, continuous and surge demand, backup hours, daily energy use, battery voltage and capacity, PV input and phase. In the 100 kW / 215 kWh reference configuration, 100 kW of PV pairs with a 100 kW hybrid converter and a 215 kWh battery, and whether PV is included is set in the quotation. Hybrid solar inverters are supplied individually and within configurations; compatibility with existing PV modules and batteries is confirmed in the quotation.

White floor-standing inverter with display and casters 
Floor-standing inverter with cabinet door open
Solar inverter specifications by listing
| Parameter | Value |
|---|---|
| Application | Industrial |
| Load Power (W) | 50 kW, 30 kW |
| Mounting Type | Ground Mounting |
| Solar Panel Type | Monocrystalline Silicon, Polycrystalline Silicon |
| Battery Type | Lead-acid, Lithium-ion, Gel battery |
| Controller Type | MPPT, Pwm, MPPT/IGBT |
| Output Voltage (V) | AC110V/120V/220V/230V/240V |
| Output Frequency | 50HZ/60HZ |
| Work Time (h) | 8-24 HOURS |
| Product name | Solar Energy SystemRoof Mounting Solar Energy System |
| Solar system type | Commercial Solar Energy System,Intelligent Solar Energy System |
| Type | Off Grid Solar System,On Grid solar system,hybrid solar system |
| Solar panel | 550W,600w,A Grade Mono Solar panel,22% efficiency |
| Inverter | AC,DC,Pure sine wave ,Low Frequency Solar Inverter,high Frequency |
| Controller | MPPT Solar Charge Controller |
| Battery | Lifepo4 Lithium Ion Batteries,gel battery,powerwall Lithium battery |
| Solar panel area | within 2 square meters,Black Solar Panel,Shingled Solar Panels |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/AC Inverters |
| Inverter Efficiency | 93% |
| Input Voltage | 12v24v48v96v |
| Output Voltage | 110v120v230v240v |
| Output Current | 10~100a |
| Output Frequency | 50hz60hz |
| Weight | 3kg~300kg |
| Product name | Off-Grid Solar Inverter |
| Rated power | 300W-30KW |
| Output waveform | Pure Sine Wave Output |
| Protection | Overload/Short Circuit/Over Charge/Over Discharge |
| Display | LCD+LED Display |
| Solar Controller | 10A-100A MPPT Solar Charge controller |
| Grid Charge current | 0-60A |
| Transformer | Isolation Transformer Inside |
| Size | 302*150*183(mm)~1100*1120*355(mm) |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/AC Inverters |
| Inverter Efficiency | 98% |
| Input Voltage | 12V/24V/48V/96V/120V/240V/384V |
| Output Voltage | AC110V/220V/230V/240V |
| Output Current | 10-100A |
| Output Frequency | 50HZ/60HZ |
| Size | 302*150*183(mm)~ |
| Weight | 3KG~300KG |
| Product name | Power Inverter With Charger |
| Rated power | 300W-30KW |
| Output waveform | Pure Sine Wave Output |
| Protection | Overload/Short Circuit/Over Charge/Over Discharge |
| Display | LCD+LED Display |
| Solar Controller | 10A-100A MPPT Solar Charge controller |
| Grid Charge current | 0-60A |
| Transformer | Isolation Transformer Inside |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/AC Inverters |
| Inverter Efficiency | 98% |
| Input Voltage | 12V/24V/48V/96V/120V/240V/384V |
| Output Voltage | AC110V/220V/230V/240V |
| Output Current | 10-100A |
| Output Frequency | 50HZ/60HZ |
| Size | 302*150*183(mm)~1100*1120*355(mm) |
| Weight | 3KG~300KG |
| Product name | Off Gird Solar Inverter Pure Sine Wave |
| Rated power | 300W-30KW |
| Output waveform | Pure Sine Wave Output |
| Protection | Overload/Short Circuit/Over Charge/Over Discharge |
| Display | LCD+LED Display |
| Solar Controller | 10A-100A MPPT Solar Charge controller |
| Grid Charge current | 0-60A |
| Transformer | Isolation Transformer Inside |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/AC Inverters |
| Inverter Efficiency | 90% |
| Input Voltage | 12V/24V/48V/96V/120V/240V/384V |
| Output Voltage | AC110V/220V/230V/240V/380V |
| Output Current | 10-100A |
| Output Frequency | 50HZ/60HZ |
| Size | 302*150*183(mm)~1100*1120*355(mm) |
| Weight | 3KG~300KG |
| Product name | 10000 Watt Power Inverter |
| Rated power | 300W-30KW |
| Output waveform | Pure Sine Wave Output |
| Protection | Overload/Short Circuit/Over Charge/Over Discharge |
| Display | LCD+LED Display |
| Solar Controller | 10A-100A MPPT Solar Charge controller |
| Grid Charge current | 0-60A |
| Transformer | Isolation Transformer Inside |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/AC Inverters |
| Inverter Efficiency | 98% |
| Input Voltage | 12V/24V/48V/96V |
| Output Voltage | 110V/220V/230V/240V |
| Output Current | 10-100A |
| Output Frequency | 50Hz/60Hz |
| Size | 302*150*183(mm)~ |
| Weight | 3KG~300KG |
| output Type | single |
| Temperature | -10 ~50℃ |
| Relative humidity | 20%~93% |
| Altitude | Below 1000m |
| wave form | pure sine wave |
| Transfer time | <10ms(typical load) |
| Material | Aluminum profiles |
| Application | Solar Power System Home |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/AC Inverters |
| Inverter Efficiency | 93% |
| Input Voltage | 12V/24V/48V/96V |
| Output Voltage | 110V/220V/230V/240V |
| Output Current | 10-100A |
| Output Frequency | 50Hz/60Hz |
| Size | 302*150*183(mm)~ |
| Weight | 3KG~300KG |
| output Type | single |
| Temperature | -10 ~50℃ |
| Relative humidity | 20%~93% |
| Altitude | Below 1000m |
| wave form | pure sine wave |
| Transfer time | <10ms(typical load) |
| Material | Aluminum profiles |
| Application | Solar Power System Home |
| Parameter | Value |
|---|---|
| Output Type | Single |
| Type | DC/DC Converters, DC/AC Inverters, AC to AC |
| Inverter Efficiency | 99% |
| Input Voltage | 12V/24V/48V/96V |
| Output Voltage | 110V/220V/230V/240V |
| Output Current | 10-100A |
| Output Frequency | 50Hz/60Hz |
| Size | 302*150*183(mm)~ |
| Weight | 3KG~300KG |
| output Type | single |
| Temperature | -10 ~50℃ |
| Relative humidity | 20%~93% |
| Altitude | Below 1000m |
| wave form | pure sine wave |
| Transfer time | <10ms(typical load) |
| Material | Aluminum profiles |
| Application | Solar Power System Home |
What Mars Solar Needs to Size and Quote a Solar Inverter
Whether a given inverter can run a house or a commercial site depends on the load list rather than the inverter alone: continuous and surge demand, daily energy use, backup hours, phase, battery voltage and capacity and the PV or battery source set the power needed. Mars Solar works from the load list, site location and quantity and returns a configuration proposal.
- Configuration proposal covering inverter power and phase, battery voltage and capacity, PV input and balance of system.
- Quotation on FOB, CIF or EXW terms, with testing before shipment defined by the supply contract alongside test records, an as-built configuration table and equipment datasheets.
- Packing and shipping; the nearest ports are Foshan, Guangzhou and Shenzhen.
Average lead time is about one month in peak season and within 15 workdays in off season, with the exact delivery window confirmed once the configuration is fixed. For the 100 kW / 215 kWh configuration, commissioning support and remote diagnosis are included in technical support and critical spares can ship with the main order; engineer guidance to site applies to the 100 kW / 215 kWh configuration and is quoted separately where it can legally be provided if the project needs it. Civil works, local installation labour and utility interconnection are excluded by default.
Export Record and After-Sales Support for Inverter Projects
Mars Solar started exporting in 2008. It has exported to more than 130 countries and regions, with main markets in North America, South America, Eastern and Western Europe, Southeast and East Asia, Africa, Oceania and the Middle East, and a foreign trade team of 21–50 people handling an export share above 90%.
Anonymised references include a hotel project in Nigeria with 250 kW PV and storage included (shipped), a cold storage project in the Philippines with 135 kW PV and storage on request (commissioned), and a farm and agriculture project in Zimbabwe with 1 MW PV and 2 MWh storage (designed). Agents in Africa, the Middle East and Asia support after-sales service.
OEM/ODM service, customization on demand and sample processing are available. Minimum order quantity is confirmed per product, and some listings start from 1 piece or 1 set. Warranty is set per component, with panels, inverters and batteries each carrying their own terms confirmed with the order.
How an order runs
- Send your requirements
- The product or kit you need, your load list or daily energy use, site location, battery voltage where relevant, and the quantity.
- Configuration and quotation
- Mars Solar proposes matching equipment from the listings on this site, or an OEM/ODM version, and quotes on FOB, CIF or EXW terms.
- Sample and order
- Sample processing is available; minimum order quantity is confirmed per product.
- Tests before shipment
- Test items are performed and recorded before shipment; the supply contract defines the tests and documents.
- Payment and shipping
- Payment by T/T, with PayPal, Western Union and MoneyGram confirmed per order; the nearest ports are Foshan, Guangzhou and Shenzhen.
Request a quotation
Send the listing name or your power, battery voltage and capacity needs and the quantity; we will propose a matching configuration.
Or write to sales@solarkitsupplier.com